NEC Univerge sv8500 Manual page 2879

Parameters on Administrator Menu (Page 2) (For Dterm Series E/Dterm 75)
Parameter
1. Ping
1. Echo Request Start
2. Destination Address
3. Requests Count
1. 4-times
2. Endless
4. Replay Time Out
2. Music Select
1. Download Data
2. Default Data
3. AutoConfig Mode
1. Disable
2. Enable
4. DTMF
0. Automatic
1. ON
2. OFF
5. RTP Alarm
0. Automatic
1. ON
2. OFF
0. Next Page (P2>>P1)
Setting/Sending Echo Request
Sending Echo Request
Setting the destination address of Echo Request
Setting the number of times that Echo Request is sent
Echo Request is sent four times
Echo Request is endlessly sent
Setting Echo Reply timer
Setting Music On Hold
Downloaded Music On Hold
Default Music On Hold
Enable or disable the AutoConfig Mode.
Disable the AutoConfig Mode.
Enable the AutoConfig Mode.
Switch DTMFAlarm ON and OFF.
Follow the setting on the System. If no setting is made in the Sys-
tem, DTMF Alarm is automatically set to OFF.
Follow the setting on the terminal (ON).
Follow the setting on the terminal (OFF).
Switch DTMF/RTP Alarm ON and OFF.
Follow the setting on the System. If no setting is made in the Sys-
tem, RTP Alarm is automatically set to ON.
Follow the setting on the terminal (ON).
Follow the setting on the terminal (OFF).
Go to Administrator Menu (Page 1).
VOL.3-392
CHAPTER 4
Description
CONFIGURATION SETUP
Default
-
-
0.0.0.0
4-times
2000
Default Data
Enable
Automatic
Automatic
-