NEC Univerge sv8500 Manual page 3214

A
STEP 4: Enter the destination number for Emergency Call, and then press the software key for "OK."
[Emergency Dial 1]
Input an emergency dial
BK Cancel
STEP 5: The LCD displays [Emergency Call] menu. Press the software key for "Exit."
[Emergency Call]
1.Emergency Dial 1
2.Emergency Dial 2
3.Emergency Dial 3
STEP 6: The LCD returns to [App Settings] menu. Press the software key for "Exit" to return to [Config]
menu.
[App Settings]
3.Incoming Popup
4.Screen Saver URL
5.Emergency Call
STEP 7: On [Config] menu, press the software key for "Save" to save the settings.
[Config]
4.Security
5.Terminal Information
6.Application Setting
Cancel Save
END
This is an example for assigning the destination number
Note:
for Emergency Dial 1. Perform these steps to Emergency
OK
Dial 2 and 3 in the same way if required.
Exit
Exit
VOL.3-727
CHAPTER 4 CONFIGURATION SETUP