NEC Univerge sv8500 Manual page 3294

5. Setting
(Continued) (Earlier than FW 2.0.0.0)
Parameter
5. Illumination Note 2
0. Automatic
1. Disable
2. Red
3. Green
4. Blue
5. Yellow
6. Purple
7. Light Blue
8. White
9. Rotation
6. Headset Ring Volume
2. Talk
1. RTP Alarm
0. Automatic
1. Disable
2. Enable
2. DTMF Tone
0. Automatic
1. Disable
2. Enable
3. Key Touch Tone
0. Automatic
1. No Tone
2. Tone
3. Voice
4. Hold Music
1. Default
2. Download
5. Prefix
1. Prefix 1 ~ 3. Prefix 3
3. Display
1. Time Format
0. Automatic
1. 12 hour Indication
2. 24 hour Indication
Description
Sets lamp indication pattern for incoming call
termination.
Sets Automatic for the lamp indication of
incoming call termination.
*The lamp illuminates Red when Automatic is
selected.
Lamp indication is OFF.
Specifies the color of lamp indication for
incoming call termination.
Not used
Sets call related data.
Sets whether to allow the alarm for detecting
packet loss in receiving speech packets.
Applies RTP alarm setting on the Telephony
Server.
Alarm is OFF.
Alarm is ON.
Sets whether to hear DTMF (PB) tone on
receiving DTMF signal.
Applies DTMF tone setting on the Telephony
Server.
DTMF tone is OFF.
DTMF tone is ON.
Sets touch tone for pressing digit key/touch-
sensitive panel.
Sets Automatic to key touch tone.
Sets key touch tone disabled.
Sets key touch tone enabled.
Enables the key touch tone by voice recognition.
Sets Music-on-Hold.
Applies the default music (Minuet).
Applies the downloaded music.
Sets prefix number.
Sets number to Prefix 1 ~ Prefix 3.
Sets display related data.
Switches 12-hour/24-hour indication.
Applies the time indication on the Telephony
Server.
12-hour indication
24-hour indication
VOL.3-807
CHAPTER 4 CONFIGURATION SETUP
Default
-
Automatic
-
-
Automatic
Automatic
Tone
Default
-
-
-
12 hour
DT750 DT730
Series Series
X X
X X
- -
X X
X X
X X
X X
X X
X X
X X
X X
X X