NEC Univerge sv8500 Manual page 3156

6.2.4 Digest Authentication
This menu assigns User ID and password for Digest Authentication.
[1] Configuration Setting on Terminal
STEP 1: On [Config] menu, select "2. SIP Settings."
[Config]
1.Network Settings
2.SIP Settings
3.Maintenance Settings
STEP 2: The LCD displays [SIP Settings] menu. Select "1. SIP User."
[SIP Settings]
1.SIP User
2.Server Address
3.Access Mode
STEP 3: On [SIP User] menu, select "1. User ID."
[SIP User]
1.User ID
2.Password
3.Incom Number
STEP 4: The LCD displays [User ID] setting screen.
[User ID]
xxxxxxxxxxxxxxxxx
BK
STEP 5: The LCD returns to [SIP User] menu. Select "2. Password."
[SIP User]
1.User ID
2.Password
3.Incom Number
A
Note: For other operations, " ↑" and " ↓" of software key,
Cancel Save
Exit
Exit
Enter User ID using the digit keys.
-Use digit keys 0-9, * and #.
-Press the software key for "BK" to delete entered value.
Cancel OK
Press the software key for "OK" when all settings are complete.
Exit
VOL.3-669
CHAPTER 4
cursor key, and touch-sensitive panel operation are
also available. Refer to Section 6.1.1.2 Operations for
more details.
CONFIGURATION SETUP