NEC Univerge sv8500 Manual page 3060

STEP 4: Press OK key and go back to the Audio Settings Menu.
STEP 5: Press Exit key on the Audio Settings Menu to go back to the Audio & Visual Settings Menu.
STEP 6: Press Exit key on the Audio & Visual Settings Menu and go back to the Main Menu.
STEP 7: Press Save key on the Main Menu to save the assigned data.
4.3.1.3 Sidetone Volume
On the Sidetone Volume parameter, set the volume of the side tone.
STEP 1: Select "1. Audio Settings" by pressing "1" key on the Audio & Visual Settings Menu.
STEP 2: Audio Settings Menu appears. Select "3. Sidetone Volume" by pressing "3".
STEP 3: Specify the side tone volume [(lower) 0-7 (higher), 9 (Automatic)]. The default value is "9".
1.Download Data
2.Default Data
Cancel
Audio & Visual Settings Menu
31.Audio Settings
2.Visual Settings
Audio Settings Menu
311.Confirmation Tone
2.Music Select
3.Sidetone Volume
4.Send Gain
5.Receive Bias
6.Receive Gain
7.Ring Settings
8.RTP Alarm
9.DTMF Play Mode
Up
Down
VOL.3-573
CHAPTER 4 CONFIGURATION SETUP
OK
Exit
Exit