NEC Univerge sv8500 Manual page 3150

In the following instances, the terminal will display an error message.
Note:
- SIP server does not exist in the network
- Connection to SIP server could not be established since the user assigned an incorrect value.
- Connection to DHCP Server could not be established since the user assigned an incorrect value
If the above occurs, perform one of the following:
- Reassign data settings
- Connect SIP server to the network.
- Connect DHCP Server to the network.
Refer to "Error Messages" for details on error messages.
6.2.2 PC Port Remote Control
To use PC Port Remote Control feature assigned by PCPro programming, the following setting is also required
on DT700 Series terminal side.
Refer to "PC Port Remote Control" in Operations and Maintenance Manual for the data assignment on
Note:
the Telephony Server.
CHAPTER 4
VOL.3-663
CONFIGURATION SETUP