NEC Univerge sv8500 Manual page 3275

[6] LLDP Settings
STEP 1: When "6. LLDP Settings" is selected, the LCD displays the following.
[Example]
When received LLDP data is valid
LLDP Receive Data
Valid
Up Down Prev
STEP 2: When the received LLDP data is valid, switch the page to display other parameters by pressing
the software key for "Up" and "Down."
• Manufacturer Name- - - - - - - - - Manufacturer Name in the received LLDP packet
• Model Name - - - - - - - - - - - - - Model Name in the received LLDP packet
• System Name - - - - - - - - - - - - - TLV Element "system name" of System Name TLV in the
• System Description - - - - - - - - - TLV Element "system description" of System Description
• Chassis ID - - - - - - - - - - - - - - - TLV Element "chassis ID" of Chassis ID TLV in the re-
• Port ID - - - - - - - - - - - - - - - - - TLV Element "port ID" of Port ID TLV in the received
• Port Description - - - - - - - - - - - TLV Element "port description" of Port Description TLV in
• PHY Auto-nego status - - - - - - - TLV Element "auto-negotiation support/status" of MAC/
• Speed & Duplex - - - - - - - - - - - MAC/PHY Configuration/Status TLV operational MAU
• Unknown Flag (Voice) - - - - - - - Unknown Tag Flag of Network Policy TLV in the received
• VLAN Tag Flag (Voice) - - - - - - TLV Element "T" of Network Policy TLV in the received
A
CHAPTER 4
[Example]
When received LLDP data is invalid
LLDP Receive Data
Invalid
Up Down Prev
received LLDP packet
TLV in the received LLDP packet
ceived LLDP packet
LLDP packet
the received LLDP packet
PHY Configuration/Status TLV in the received LLDP pack-
et
type in the received LLDP packet
LLDP packet
LLDP packet
VOL.3-788
CONFIGURATION SETUP