NEC Univerge sv8500 Manual page 3071

STEP 7: Press Save key on the Main Menu to save the assigned data.
4.3.2.2 Local Volume
On the Local Volume parameters, set whether to display the local volume indication on the LCD.
STEP 1: Select "2. Visual Settings" by pressing "2" key on the Audio & Visual Settings Menu.
STEP 2: Visual Settings Menu appears. Select "2. Local Volume" by pressing "2" key.
STEP 3: Not to display the local volume indication, select "1. Disable" by pressing "1" key. To display the local
volume indication, select "2. Enable" by pressing "2" key. The default setting is "Enable".
The currently enabled item flashes.
Note:
STEP 4: Press OK key and go back to the Visual Settings Menu.
STEP 5: Press Exit key on the Audio Settings Menu to go back to the Audio & Visual Settings Menu.
STEP 6: Press Exit key on the Audio & Visual Settings Menu and go back to the Main Menu.
STEP 7: Press Save key on the Main Menu to save the assigned data.
Audio & Visual Settings Menu
31.Audio Settings
2.Visual Settings
Visual Settings Menu
321.Time Display Type
2.Local Volume
3.Language
Up Down
1.Disable
2.Enable
Cancel
VOL.3-584
CHAPTER 4 CONFIGURATION SETUP
Exit
Exit
OK