NEC Univerge sv8500 Manual page 3092

5.1 QoS
On the QoS Menu, the QoS information can be displayed.
STEP 1: To open the QoS screen, press "1" key on the Online Monitoring Main screen.
Press Exit key to go back to the normal operation display.
Note:
STEP 2: The QoS screen appears as follows:
Press Exit key to go back to the normal operation display.
Note:
Press Prev key to go back to the Online Monitoring Main screen.
• Lost Packet: The number of packet-loss events (8 digits)
• Codec
• Payload
The maximum displayable value is "99999999". Even if the number of packet-loss events is more than
Note 1:
99999999, "99999999" is displayed on the LCD.
During a conversation, the number of packet-loss events for five seconds is displayed. After a lapse of five
Note 2:
seconds, the counting of the number of packet-loss events is started again and the result of the next five
seconds is displayed on the LCD.
Except during a conversation, the number of packet-loss events for the last call is displayed. If starting a
new call, the number of packet-loss events for the last call is cleared and the counting for the new call is
started.
Online Monitoring Main Screen
1.QoS
2.System Information
3.Ping
Up Down
1.Lost Packet
2.Codec
3.Payload
Up Down
: Codec
Note 3
: Payload size
Note 3
VOL.3-605
CHAPTER 4
Exit
: XXXXXXXX
:
G.XXXx
:
XXms
Prev
,
Note 1 Note 2
CONFIGURATION SETUP