NEC Univerge sv8500 Manual page 3027

STEP 4: When "1.Speed & Duplex" is selected by pressing "1" key:
Specify the LAN speed and communication method (full-duplex or half-duplex).
Autonegotiation is set by pressing "1" key.
100Mbps speed and full-duplex mode are set by pressing "2" key.
100Mbps speed and half-duplex mode are set by pressing "3" key.
10Mbps speed and full-duplex mode are set by pressing "4" key.
10Mbps speed and half-duplex mode are set by pressing "5" key.
The default is "Autonego".
When "2.Port VLAN Mode" is selected by pressing "2" key:
Select whether to enable or disable the port VLAN (PC port). Press "1" key to disable Port
VLAN. Press "2" key to enable Port VLAN. The default VLAN Mode is "1. Disable".
When "3.Port VLAN ID" is selected by pressing "3" key:
Enter port VLAN ID (0-4094). The default port VLAN ID is 7.
When "4.Port VLAN Priority" is selected by pressing "4" key:
Specify the port VLAN Priority (0-7). The default port VLAN Priority is 5.
When "5.Port Available" is selected by pressing "5" key:
Press "1" key to set PC Port to "Automatic" (default setting). PC Port is disabled/enabled
according to directions from the System.
Press "2" key to disable the PC port.
For DtermIP (SIP) with Firmware Version earlier than 3.0.0.0:
Note:
Select whether to enable or disable the PC port. Press "1" key to disable the PC port. Press "2" key to en-
able the PC port. PC port is enabled by the default setting.
When "6.EAPOL Forwarding" is selected by pressing "6" key:
Select whether to enable or disable the EAPOL Frame Forwarding function. Press "1" key to
disable the EAPOL Frame Forwarding function. Press "2" key to enable the EAPOL Frame
Forwarding function.
For DtermIP (SIP) with Firmware Version earlier than 4.1.x.x:
Note:
EAPOL Frame Forwarding function port is enabled by the default setting.
For DtermIP (SIP) with Firmware Version 4.1.x.x or later:
EAPOL Frame Forwarding function port is disabled by the default setting.
PC Port Settings Menu
1621.Speed & Duplex
2.Port VLAN Mode
3.Port VLAN ID
4.Port VLAN Priority
5.Port Available
6.EAPOL Forwarding
Up Down Exit
VOL.3-540
CHAPTER 4 CONFIGURATION SETUP