Advanced Settings; Lan Port Settings - NEC Univerge sv8500 Manual

4.1.6

Advanced Settings

Advanced Settings parameter has the following additional parameters: LAN Port Settings, PC Port Settings,
CDP Mode, Type of Service and 802.1X Settings.

4.1.6.1 LAN Port Settings

On the LAN Port Settings parameter, set the LAN port-related data.
STEP 1: Select "6. Advanced Settings" by pressing "6" key on the Network Settings Menu.
STEP 2: Advanced Settings Menu appears. Select "1. LAN Port Settings" by pressing "1" key on the Advanced
Settings Menu.
STEP 3: LAN Port Settings Menu appears.
Select "1. Speed & Duplex" by pressing "1" key to set LAN speed and communication method (full-
duplex or half-duplex).
Select "2. VLAN Mode" by pressing "2" key to set the VLAN Mode.
Select "3. VLAN ID" by pressing "3" key to set the VLAN ID.
Select "4. VLAN Priority" by pressing "4" key to set the VLAN Priority.
Network Settings Menu
11.DHCP Mode
2.IP Address
3.Default Gateway
4.Subnetmask
5.DNS Address
6.Advanced Settings
Up
Down Exit
Advanced Settings Menu
161.LAN Port Settings
2.PC Port Settings
3.CDP Mode
4.Type of Service
5.802.1X Settings
Up Down Exit
VOL.3-537
CHAPTER 4 CONFIGURATION SETUP