NEC Univerge sv8500 Manual page 3229

STEP 6: The LCD displays [LLDP Settings] screen.
[LLDP Settings]
1.LLDP Mode
2.Auto Setting Mode
3.RX Waiting Time
STEP 7: On [LLDP Settings] menu, select "2. Auto Setting Mode."
[Auto Setting Mode]
1.Disable
2.Enable
Cancel
STEP 8: The LCD displays [LLDP Settings] screen. Select "3. RX Waiting Time."
[LLDP Settings]
1.LLDP Mode
2.Auto Setting Mode
3.RX Waiting Time
STEP 9: The LCD displays [RX Waiting Time] menu.
[RX Waiting Time]
1-60 (second)
BK Cancel
B
Exit
- Press the digit key "2" to enable the Auto Setting Mode.
- Press the digit key "1" to disable the Auto Setting Mode.
- Press the software key for "OK" when the [Auto Setting Mode] setting
is complete.
Note:
OK
- "2. Enable" is set by default.
- This data is valid when the LLDP mode is enabled.
Exit
- Set the RX Waiting Time using digit keys.
- You can set 1- 60 (default time: 15) seconds.
- Press the software key for "BK" to delete the RX Waiting Time.
- Press the software key for "OK" when the [RX Waiting Time] settings
15
OK
is complete.
Note: This data is valid when the LLDP mode and Auto Setting Mode
are enabled.
VOL.3-742
CHAPTER 4 CONFIGURATION SETUP