NEC Univerge sv8500 Manual page 2523

Fp85-110 s7
Hide thumbs Also See for Univerge sv8500:
Table of Contents

Advertisement

3.1.1
DT300 Series
(1) DT300 Series refers to the following terminals.
8–button type (DESI–LESS)
24–button type with 8LK Unit
24–button type
DT330
12–button type with PSA Unit
12–button type
DT300
Series
12–button type Cordless Terminal *
* Available since FP85-109 S6.
2–button type without LCD
6–button type
DT310
12–button type without LCD *
* Available in North America only.
(2) The following shows service conditions specific to Cordless Terminal (DT330 (12BT)).
Cordless Terminal (DT330 (12BT)) is available when PA-16ELCN-A (since SP-4034 16ELCN-A PROG-
B Issue1) is used.
By replacing a DT330 handset cradle with the Bluetooth Handset (BCH-LD (BK/WH)) as a side option, a
DT330 can be used as a Cordless Terminal. For details, refer to the operation manual of the terminal.
The Bluetooth Handset does not have the Redial key. When using the Redial key, assign the Redial key to
the Feature key between 1-8 by using AKYD FKY=8 (Last Number Called -D [L-6D]). *
* When pressing the Redial key on the Bluetooth Handset, the call is originated from the speakerphone on
the DT330 Base Unit. (The same effect as the key of DT330 Base Unit is pressed). To call with the Blue-
tooth Handset, press the Call key.
When a call arrives while the terminal is in another call, the ringer of the DT330 Base Unit is enabled but
the ringer of the Bluetooth Handset is disabled.
When Off Hook Ringing** is set to the terminal, the ringer of the DT330 Base Unit is also disabled.
** Off Hook Ringing cannot be set to the Bluetooth Handset.
While the DT330 Base Unit displays the Menu of Bluetooth setting ([Setting]
tooth]), the ringer of the DT330 Base Unit is disabled.
While the Bluetooth Handset displays the setting menus, the ringer of the Bluetooth Handset is disabled.
By pressing the Transfer key on the Bluetooth Handset in an idle mode, the DT330 Base Unit is returned
to an idle mode, which is a behavior equivalent of pressing the Exit key.
DT300 Series
VOL.3-36
CHAPTER 1
Number of Line/Feature Keys
32 (8x4)
32 (24+8)
24
12
12
12
2
6
12
[Side Option]
TERMINALS
[Blue-

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents