NEC Univerge sv8500 Manual page 2869

Preparation
Prepare the following to use DtermIP/IP Enabled Dterm:
• Telephony Server
• SP-PHD
Note 1
• DHCP server (required when DHCP is used)
• FTP (TFTP) server (required when downloading)
To use DtermIP/IP Enabled Dterm immediately after the data assignment, connect the terminal to the network
that has DHCP server and FTP (TFTP) server.
System
For detailed information about PHs including SP-PHD, refer to Vol.1, Chapter 2, "2. IP Related Basic
Note 1:
Programming" in this manual.
DtermIP/IP Enabled Dterm Data Assignment Preparation
DHCP server
CHAPTER 4
LAN
FTP (TFTP) server
VOL.3-382
CONFIGURATION SETUP
DtermIP
connect