NEC Univerge sv8500 Manual page 2995

Default setting is "1: MANUAL".
Note 1:
(b) Press the SRC key. The display returns to the second page of the Configuration Menu.
Do not change this data.
Note 1:
(c) To data to additional configuration items, refer to the Selecting a Configuration Item section. When
finished, proceed to the Updating the Configuration Data section.
6. REC VOLUME ADJUSTMENT
This item specifies the recording/paging level of the received voice. Note that the voice level at the operator side
cannot be adjusted.
(a) Press the desired number. An asterisk (*) shows the selected number.
1. +2dB Up
2. 0dB (standard level)
3. -4dB Down
4. -8dB Down
SRC: Return to the Configuration Menu
The default setting is "2: 0dB".
Note 1:
(b) Press the SRC key. The display returns to the third page of the Configuration Menu.
(c) To assign data to additional configuration items, refer to the Selecting a Configuration Item section.
When finished, proceed to the Updating the Configuration Data section.
[CONFIG MENU P2] VER x
1: REC CONTROL
2: PAGE CONTROL
3: SUP CONNECTION
[REC VOLUME ADJUSTMENT]
1: +2dB 4: -8dB
*2: 0dB
Note 1
3: -4dB
[CONFIG MENU P3] VER x
1: REC VOLUME
2: BLF
3: HOLD/START/RELEASE SWAP Answer: update
VOL.3-508
CHAPTER 4
SRC: prev page
DEST next page
Release: exit
Answer: update
Note 1
SRC: menu
SRC: prev page
DEST: next page
Release: exit
CONFIGURATION SETUP