6. Power Failure Transfer (PFT)
6.1
General
Here describes how to install PFT card and the related cross connections on the MDF. For this function, PA-
M69-A circuit card is required. When using PFT function of IP devices including MC & MG (COT) with PFT,
this circuit card is not required.
PFT is activated when a failure occurs in the system. Then a dedicated analog station is directly connected to the C.O. line.
Power Failure Transfer
PFT
LC
Analog
Telephone
Telephony Server
CHAPTER 3
C.O. Line
COT
VOL.3-376
NETWORK INTERFACE
PSTN