NEC Univerge sv8500 Manual page 3226

To configure VLAN priority, DT700 Series needs to receive an LLDP packet containing one or more Net-
work Policy TLVs. VLAN priority is determined based on the received Network TLVs meeting the condi-
tions below:
Network Policy TLV Requirements for VLAN Priority Configuration
For TLV definition, refer to the relevant manuals.
Note:
This TLV definition will affect all types of packets (such as SIP, RTP, and HTTP) handled by DT700 Series.
Note:
(15) Conditions for ToS mode/RTP
To configure ToS mode/RTP, DT700 Series needs to receive an LLDP packet containing one or more Net-
work Policy TLVs. ToS mode/RTP is determined based on the received Network TLVs meeting the condi-
tions below:
Network Policy TLV Requirements for ToS Mode/RTP Configuration
For TLV definition, refer to the relevant manuals.
Note:
(16) Conditions for ToS mode/SIP
To configure ToS mode/SIP, DT700 Series needs to receive an LLDP packet containing one or more Net-
work Policy TLVs. ToS mode/SIP is determined based on the received Network TLVs meeting the condi-
tions below:
Network Policy TLV Requirements for ToS Mode/SIP Configuration
Priority
Primary
Secondary
For TLV definition, refer to the relevant manuals.
Note:
TLV Element
Application Type
Unknown Policy Flag (U)
TLV Element
Application Type
Unknown Policy Flag (U)
Tagged Flag (T)
TLV Element
Application Type
Unknown Policy Flag (U)
Tagged Flag (T)
Application Type
Unknown Policy Flag (U)
Tagged Flag (T)
VOL.3-739
CHAPTER 4 CONFIGURATION SETUP
Condition
Voice (1)
0
Condition
Voice (1)
0
Not Applicable
Condition
Voice Signaling (2)
0
Not Applicable
Voice (1)
0
Not Applicable