NEC Univerge sv8500 Manual page 2572

[3] Adjusting the Tilt Leg
The angle of the tilt leg can be adjusted in four levels.
<Raising the angle of the tilt leg>
STEP 1: Turn the Desktop terminal upside down.
STEP 2: Pull the tilt leg toward you until you hear a click.
STEP 3: Turn the Desktop terminal right side up.
<Lowering the angle of the tilt leg>
STEP 1: Turn the Desktop terminal upside down.
STEP 2: While lifting the center of the stopper, push the tilt leg away from you until you hear a click.
STEP 3: Turn the Desktop terminal right side up.
4th level
3rd level
2nd level
1st level
tilt leg
VOL.3-85
CHAPTER 1
tilt leg
stopper
TERMINALS