[2] SIP Settings
STEP 1: When "2.SIP Settings" is selected, the LCD displays the User ID for digest authentication as
follows.
User ID
Up Down Prev
STEP 2: Switch the page to display other parameters by pressing the software key for "Up" and "Down."
•
User ID - - - - - - - - - - - - - User ID for digest authentication Note 1
•
Terminal URL - - - - - - - - Terminal FQDN informed by SIP server
•
Connecting Server - - - - - IP address or FQDN of the connecting SIP server Note 1, Note 2, Note 3
•
1st Server - - - - - - - - - - - IP address or FQDN of the 1st SIP server Note 1, Note 2, Note 4, Note 5
•
2nd Server - - - - - - - - - - - IP address or FQDN of the 2nd SIP server Note 1, Note 2, Note 4, Note 5
3rd Server - - - - - - - - - - - IP address or FQDN of the 3rd SIP server Note 1, Note 2, Note 4, Note 5
•
•
4th Server - - - - - - - - - - - IP address or FQDN of the 4th SIP server Note 1, Note 2, Note 4, Note 5
•
Access Mode - - - - - - - - - Access mode to SIP server (Remote/Normal)
•
Port (1st) - - - - - - - - - - - - Destination port number of the sending packet to 1st SIP server
•
Port (2nd) - - - - - - - - - - - Destination port number of the sending packet to 2nd SIP server
•
Port (3rd) - - - - - - - - - - - Destination port number of the sending packet to 3rd SIP server
•
Port (4th)- - - - - - - - - - - - Destination port number of the sending packet to 4th SIP server
•
Area ID- - - - - - - - - - - - - Country code (tone pattern)
•
Authentication Mode- - - - Whether to use terminal authentication
•
Retransmit Interval - - - - - Re-sending timer for registration process (Standard/6 seconds)
•
Keeping Call - - - - - - - - - Whether to use call hold function when communication failure occurs with
•
Howler Tone - - - - - - - - - Whether to ring howler tone
•
NAT Traversal Mode- - - - Data assignment on the terminal is prohibited.
•
Network Area Name - - - - Data assignment on the terminal is prohibited.
•
WAN Mate IP Address - - Data assignment on the terminal is prohibited.
•
WAN SIP Mate Port - - - - Data assignment on the terminal is prohibited.
•
WAN Self IP Address - - - Data assignment on the terminal is prohibited.
*See Parameters in SIP Settings for the page switching order by Up and Down key.
STEP 3: Pressing the software key "Prev" returns the LCD to System Information menu.
2.SIP Settings
3.Audio&Visual Settings
4.Maintenance Setting
Up Down Prev
END
xxxxxxxx
the Telephony Server
Exit
VOL.3-779
CHAPTER 4
CONFIGURATION SETUP