NEC Univerge sv8500 Manual page 3088

To delete an entered character, press BK key.
Note:
STEP 4: Press OK key. The following display appears. Enter the same password again for confirmation.
If the password entered here differs from the password entered in STEP 3, the following message will be
Note:
displayed. To re-enter the correct password, press Retry key.
STEP 5: Press OK key to go back to the Maintenance Settings Menu.
STEP 6: Press Exit key on the Maintenance Settings to go back to the Main Menu.
STEP 7: Press Save key on the Main Menu to save the assigned data.
Confirm
XXXXXXXXXX
BK Cancel OK
Unauthorized!
Cancel Retry
VOL.3-601
CHAPTER 4 CONFIGURATION SETUP