NEC Univerge sv8500 Manual page 3288

Hide thumbs Also See for Univerge sv8500:

Table of Contents

Configuration Menu List (Earlier than FW 2.0.0.0)

This section lists the configuration menu used for DT700 Series configuration setting. DT750 Series, DT730

Series, and DT710 Series columns on the tables below show whether the menu is available or not for each ter-

DT710 Series supports Tool and Config menu only.

(Earlier than FW 2.0.0.0)

1. Missed Note 1

2. Outgoing Note 1

3. Incoming Note 1

4. Delete All

When [C-195] Call History (ASFC SFI: 238) is in service, the LCD moves on to the list of Call History.

The parameters under [History] menu is not available.

Even though Terminal Call History is set as out of service (ASFC SFI: 248=0), the parameters under [His-

tory] menu will be displayed on the terminal's configuration menu regardless of SFI: 248 data setting.

On [History] menu, pressing the software key for "Option" displays the following sub menu.

2. Directory Add

Category Set

3. Voice Mail

Priority Flag

Directory Search

Directory Add

Lists the history of missed calls.

Lists the history of outgoing calls.

Lists the history of incoming calls.

Deletes the call history completely.

Originates a call to the number displayed on the

Registers the number displayed on the history to

Registers new number.

Selects the group the new number registered to.

Sets the priority order of dialing number for call

origination.

Edits Directory. (This menu is displayed after

Priority Flag setting.)

Adds numbers to searched data.

Searches the Directory data to which you want to

add the number

Adds the number to the searched data on the

Table of Contents