NEC Univerge sv8500 Manual page 3178

STEP 9: The LCD returns to [802.1X Supplicant] menu. Select "5" to display the [EAP VLAN Mode] menu.
[802.1X Supplicant]
1.Supplicant
2.EAP Method
3.Account
STEP 10: Select "2. Enable." Verify that "2. Enable" line is flashing. Then, press the software key for "OK."
[Supplicant]
1.Disable
2.Enable
Cancel OK
STEP 11: The LCD returns to [802.1X Supplicant] menu. Press the software key for "Exit."
[802.1X Supplicant]
1.Supplicant
2.EAP Method
3.Account
STEP 12: The LCD returns to [Security] menu. Press the software key for "Exit" to return to the [Config] menu.
[Security]
1.Web Programming
2.Push Server
3.Admin Password
Exit
Note When the user selects "2. Enable" in "EAPOL VLAN
Mode," VLAN tag will be attached according to the
following data settings:
- "VLAN Mode"
- "VLAN ID"
- "VLAN Priority"
Exit
Exit
VOL.3-691
CHAPTER 4 CONFIGURATION SETUP