NEC Univerge sv8500 Manual page 2938

1.4.9.3 Setting Music On Hold
The following procedure explains how to set Music On Hold to be heard by Dterm user.
Note:
STEP 1: Open the User Menu by pressing "Hold"+"Transfer"+"*"+"#" while the terminal is in normal operation,
indicating an error message or "DHCP Connecting.../DRS(1st) Connecting..." on the display.
Two items are displayed on the terminal.
Note: When using Backup DRS, "DRS(2nd) Connecting...", "DRS(3rd) Connecting...", or "DRS(4th) Connecting..."
will be displayed instead of "DRS(1st) Connecting...".
STEP 2: Open the Administrator Menu by pressing "Hold"+"#"+"0" on the User Menu.
The following Administrator Menu is displayed.
STEP 3: Select "0. Next Page (P1 >> P2)" by pressing "0" on the menu. The following Administrator Menu (Page 2) is
displayed. Select "2. Music Select" by pressing "2" on the menu.
STEP 4: The currently setting for Music On Hold is flashing. To change the current setting for the Music On Hold,
press the applicable number and then press OK key. If you don't need to change, press Cancel Key.
When using the downloaded Music On Hold
When using the default Music On Hold
After the Music On Hold selection has been made, return to the Administrator Menu by selecting
"0. Next Page (P2 >> P1)".
A
[User Menu]
1. DHCP Mode
2. DRS Address Primary
Up Down Cancel
[Administrator Menu (Page 1)]
1. DtermIP Mode
2. Download Address
Up Down
1. Ping
2. Music Select
Up Down
Download Data
Default Data
1. Download Data
2. Default Data
Cancel OK
VOL.3-451
CHAPTER 4
Save
Administrator Menu (Page 1) List
1. DtermIP Mode
2. Download Address
3. Area ID
4. Port
Up
5. Download
6. SoftReset
Exit
7. Factory Value
8. Type of Service
9. Language
0. Next Page (P1 >> P2)
Down
CONFIGURATION SETUP