NEC Univerge sv8500 Manual page 3241

STEP 10: On [Network Settings] menu, select "3. Subnet Mask." Assign the Subnet Mask using the digit keys.
[Subnet Mask]
*'For'.'
0. 0. 0.
BK Cancel
Note: When Backup IP is in service, this data will be also overwritten by obtained Subnet Mask if DT700
Series obtains an IP address from DHCP server.
STEP 11: The LCD displays [Network Settings] menu.
[Network Settings]
1.IP Address
2.Default Gateway
3.Subnet Mask
STEP 12: On [Network Settings] menu, select "2.Default Gateway." Assign the Default Gateway address using
the digit keys.
[Default Gateway]
*'For'.'
0. 0. 0.
BK Cancel
Note: When Backup IP is in service, this data will be overwritten by obtained Default Gateway address
if DT700 Series obtains an IP address from DHCP server. If obtained data does not have a Default
Gateway address, the existing data is maintained.
STEP 13: The LCD displays [Network Settings] menu.
[Network Settings]
1.IP Address
2.Default Gateway
3.Subnet Mask
C
- Use "*" to separate each byte.
- Press the software key for "BK" to delete the input value.
- Press the software key for "OK" when the [Subnet Mask] setting is
0
complete.
OK
Exit
- Use "*" to separate each byte.
- Press the software key for "BK" to delete the input value.
- Press the software key for "OK" when the [Default Gateway] setting
0
is complete.
OK
Exit
VOL.3-754
CHAPTER 4 CONFIGURATION SETUP