NEC Univerge sv8500 Manual page 2453

• "SR–MGC No. Individual" radio button:
Click to specify the target SR–MGC number to copy office data.
SR–MGC Number:
Click to specify the SR–MGC number (0–255) to copy office data.
The clicked number will be displayed in "yellow."
Re–click the number to cancel the office data copy and the display changes to "white."
• "All SR–MGC No." radio button:
Click to execute office data copy to all the SR–MGCs in the network.
The number with SR–MGC implemented will be displayed in "yellow."
The number without SR–MGC implemented will be displayed in "gray."
When there is linkage to FCCS Cluster, the number will be displayed in "magenta" if SR–MGC is
implemented in the backup node. In this case, Office Data Copy is unavailable.
The meaning of the display colors are indicated below.
Colors
Gray
White
Yellow
Blue
Green
Red
Magenta (Pink)
[11] Initialize SR–MGC (SR T and SR S)
After finishing office data copy, the Telephony Server (MGC) requests the SR-MGC to initialize. Wait for
the SR-MGC to be initialized, which takes about five minutes.
<About SR-MGC initialization>
If Office Data Copy is performed in the following status, initialization of SR–MGC is required.
- when office data file does not exist on the CF card of SR–MGC
- after the change of the office data requiring MGC initialization
To initialize SR–MGC, use either of the following methods.
(1) Initialize SR–MGC using the CMNT command's "Initialize" tab (CMNT command only targets SR T):
<Initialize Tab>
• "ALL" radio button:
Execute initialization to all the SR–MGCs in the network.
Meanings
SR–MGC number unimplemented
No request for Office Data Copy
Office Data Copy request is in queue (request exists)
Office Data Copy is running
Office Data Copy was successful
Office Data Copy failed
SR–MGC number implemented in backup node
VOL.2-2200
SR-MGC