NEC Univerge sv8500 Manual page 3185

STEP 10: The LCD returns to [PC Port Settings] menu. Select "4. Port VLAN Priority."
[PC Port Settings]
2.Port VLAN Mode
3.Port VLAN ID
4.Port VLAN Priority
Exit
STEP 11: The LCD displays [VLAN Priority] menu. Use digit keys to assign VLAN ID.
[VLAN Priority]
0–7
Cancel OK
STEP 12: The LCD returns to [PC Port Settings] menu. Select "7. Port Security."
[PC Port Settings]
2.Port VLAN Mode
3.Port VLAN ID
4.Port VLAN Priority
Exit
Note: [Port Security] menu is available for firmware version 5.0.0.0 or later (DT730G with firmware version 1.0.0.0 or later).
For the terminal (except for DT730G) with firmware version 4.0.0.0 or earlier, press the software key for "Exit" and Go to STEP 15.
STEP 13: The LCD displays [Port Security] menu. Select "2. Enable" and press the software key for "OK."
[Port Security]
1.Disable
2.Enable
Cancel OK
STEP 14: The LCD displays [PC Port Settings] menu. Press the software key for "Exit."
[PC Port Settings]
2.Port VLAN Mode
3.Port VLAN ID
4.Port VLAN Priority
Exit
- VLAN Priority value must be between 0–7.
5
- Press the software key for "OK" when all settings are complete.
VOL.3-698
CHAPTER 4 CONFIGURATION SETUP