NEC Univerge sv8500 Manual page 3173

A
STEP 5: On [Receive Gain] menu, use digit keys to assign Handset Receive Gain. Note 1
Press the software key for "OK" when all settings are complete to return to [Audio] menu.
[Receive Gain]
0-31
BK Cancel OK
- Use digit keys 0–31.
- Press the software key for "BK"
to delete entered value.
Note 1: Sidetone volume set by system takes
priority over this setting.
Note 2: Volume becomes 2 dB higher/lower in each change of Assigned Value.
STEP 6: On [Audio] menu, press the software key for "Exit" to display [Adjust] menu.
[Audio]
1.Sidetone Volume
2.Send Gain
3.Receive Bias
STEP 7: On [Adjust] menu, press the software key for "Exit" to display [Maintenance] menu.
[Adjust]
1.Audio
2.Key Kit Type
3.Calibration
STEP 8: On [Maintenance] menu, press the software key for "Exit" to display [Config] menu.
[Maintenance]
1.Download Menu
2.Hard Reset
3.Data Clear
STEP 9: On [Config] main menu, press the software key for "Save" to save settings.
[Config]
1.Network Settings
2.SIP Settings
3.Maintenance Settings
Cancel Save
END
22
Exit
Exit
Exit
VOL.3-686
CHAPTER 4
Assigned Value Note 2
0
~
16
17
18
19
20
21
22
23
24
~
31
CONFIGURATION SETUP
Handset Volume
(Minimum Volume)
~
(Initial Value)
(Maximum Volume)