NEC Univerge sv8500 Manual page 2891

B
Step 9: If "3. Enable (w/ Spare IP)" is flashing, press OK key and return to the User Menu.
STEP 10: Select "2. DRS Address Primary" by pressing "2" key on the User Menu.
STEP 11: Enter the IP address of the DRS connected to the LAN.
Note: The same address is to be set to the DHCP server.
When the IP address is entered, press "OK" key and return to the User Menu.
"OK" key entry while the data input is incomplete will be ignored. To stop data entry, press "Cancel" key
STEP 12: Select "3. BackUp-DRS Address" by pressing "3" key".
C
2. Enable
3. Enable (w/ Spare IP)
Cancel OK
Up Down
[User Menu]
2. DRS Address Primary
3. BackUp-DRS Address
Up
Down Cancel Save
Adr? XXX.XXX.XXX.XXX
'*' For .
BK Cancel OK
[User Menu]
2. DRS Address Primary
3. BackUp-DRS Address
UP Down Cancel Save
VOL.3-404
CHAPTER 4 CONFIGURATION SETUP