NEC Univerge sv8500 Manual page 3190

STEP 4: The LCD will display either of the following:
Error
[Password]
Password Error.
1. Press the software key for OK.
2. Return to Step 3.
STEP 5: The LCD returns to [User Setting] menu. Press the software key for "Back."
[User Setting]
4.Password Change
5.Security (Not Used)
6.Peripheral (Not Used)
STEP 6: The LCD returns to [Setting] menu. Press the software key for "OK" to save settings.
[Setting]
1.User Setting
2.Download
3.Data Backup/Restore
Back
END
OK
Back
OK
VOL.3-703
CHAPTER 4
Complete
[Password]
Complete.
1. Press the software key for OK.
2. Proceed to Step 5.
CONFIGURATION SETUP
OK