NEC Univerge sv8500 Manual page 3110

(b) Switch to [Config] menu after login
STEP 1: On [Menu] screen, select the following menu for each terminal type.
DT750 Series (Color LCD):
DT730 Series (Standard LCD):
DT710 Series (2-line LCD):
STEP 2: The LCD displays password entry screen for administrator's menu.
User Name
Password
BK
STEP 3: After a while, [Config] menu is displayed.
[Config]
1.Network Settings
2.SIP Settings
3.Maintenance Settings
END
Administrator Menu
{Config}
(1) Network Settings
(2) SIP Settings
(3) Maintenance Settings
(4) Security
(5) Terminal Information
(6) Application Settings
Cancel
DT750 Series (Color LCD)
To exit [Config] menu, press the software key for "Cancel" or "Save." After existing [Config] menu, the
Note:
terminal restarts and returns to "Initializing..." display (STEP 2 in [1] Power On).
Refer to Section 6.3 Configuration Menu List (Earlier than FW 2.0.0.0) or Section 6.4 Configuration Menu
Note:
List (Not Earlier Than FW 2.0.0.0 but Earlier Than FW 5.0.0.0) for all the parameters on the configuration
menu.
1. Enter User Name, and press the software key for "SET."
2. Enter Password, and press the software key for "OK."
ADMIN
Note:
Set Cancel OK
Cancel Save
1/1
[Config]
1.Network Settings
2.SIP Settings
3.Maintenance Settings
Save
DT730 Series (Standard LCD)
CHAPTER 4
"0" key
"0" key
"0. Config"
Default value
User Name: ADMIN
Password: 6633222
*Be sure to change the default password. See Section
6.2.14 Password Change.
Cancel Save
VOL.3-623
CONFIGURATION SETUP
1.Network Settings
2.SIP Settings
Cancel Save
DT710 Series (2-line LCD)