NEC Univerge sv8500 Manual page 3282

6.2.25.3 Downloading Procedure
Following shows the procedure of program download. Also program download by specifying a file name is
available.
[1] Configuration Setting on Terminal
STEP 1: Prepare download file on FTP/TFTP server.
- FTP server
Place the files to be downloaded on the specified directory.
* "C:\InetPub\ftproot" is the default directory for Windows server.
- TFTP server
Place the files to be downloaded under the directory for download.
File
type
STEP 2: On [Config] menu, select "3. Maintenance."
[Config]
1.Network Settings
2.SIP Settings
3.Maintenance Settings
STEP 3: The LCD displays [Maintenance] menu. Select "1. Download Menu."
[Maintenance]
1.Download Menu
2.Hard Reset
3.Data Clear
STEP 4: On [Download menu], select "3. Protocol."
[Download Menu]
1.Download Files
2.Download Address
3.Protocol
STEP 5: On [Protocol] screen, select the file server's protocol type "1. FTP" or "2. TFTP, and then press the
software key for "OK."
[Protocol]
1.FTP
2.TFTP
A
Cancel Save
Exit
Exit
- When FTP is selected
Cancel OK
- When TFTP is selected
VOL.3-795
CHAPTER 4 CONFIGURATION SETUP
Go to STEP 6
Go to STEP 14