NEC Univerge sv8500 Manual page 3045

4.2.4 SIP Server Port
On the SIP Server Port parameter, set the port number of the SIP server.
STEP 1: Select "4. SIP Server Port" by pressing "4" key on the SIP Settings Menu.
STEP 2: Press "1", "2", "3" or "4" key to select a SIP server whose port number is set.
STEP 3: Enter the port number (1024-65535) of the specified SIP server.
The default port number is 5060.
Note:
To delete an entered character, press BK key.
Note:
STEP 4: Press OK key and go back to the display of Step 2. Repeat Step 2-3 until all the necessary servers are
set.
STEP 5: When the all necessary data is set, press Exit key on the display of Step 2 to go back to the SIP Settings
Menu.
STEP 6: Press Exit key on the SIP Settings Menu and go back to the Main Menu.
SIP Settings Menu
21.User
2.Server Address & URI
3.Access Mode
4.SIP Server Port
5.Area ID
6.Encryption
7.Extra Function
Up Down
Exit
241.1st Server
2.2nd Server
3.3rd Server
4.4th Server
5.RegistrarDestination
Exit
Up Down
Port?
XXXXX
(1024-65535)
BK Cancel
VOL.3-558
CHAPTER 4 CONFIGURATION SETUP
OK