NEC Univerge sv8500 Manual page 3247

6.2.23.2 Downloading Procedure
Program downloading procedure is explained. Also program downloading specifying the file name is available.
[1] Configuration Setting on Terminal
STEP 1: Prepare download file on FTP/TFTP server.
- FTP server
Place the files to be downloaded on the specified directory.
* "C:\InetPub\ftproot" is the default directory for Windows server.
- TFTP server
Place the files to be downloaded under the directory for download.
File
(b) Configuration, Boot & Program, Flash memory, Voice, Translation file
type
(a) Music on Hold, Ringing Tone, and Phonebook downloading
STEP 2: On the main menu [Menu] screen, select "5. Setting."
[Menu]
1.History
2.Directory
3.Tool
STEP 3: On [Setting] menu, select "2. Donwload."
[Setting]
1.User Setting
2.Download
3.Data Backup/Restore
STEP 4: On [Download menu], select "3. Protocol."
[Download Menu]
1.Download Files
2.Download Address
3.Protocol
A
downloading
Go to STEP 21
Up
Back OK
Down
Back OK
Back OK
VOL.3-760
CHAPTER 4
User Menu List
Note: For other operations, "↑"
1. History
2. Directory
3. Tool
5. Setting
0. Config
CONFIGURATION SETUP
and "↓" of software key,
cursor key, and touch-
sensitive panel operation
are also available. Refer to
Section 6.1.1.2 Operations
for more details.