NEC Univerge sv8500 Manual page 3287

[2] Configuration Setting by Web Programming
STEP 1: Prepare download file on FTP/TFTP server. (See STEP 1 in [1] Configuration Setting on Terminal.)
STEP 2: Select [Maintenance]
For firmware versions earlier than 4.0.0.0 (except for DT730G), displayed as "Translation Data."
Note 1:
STEP 3: Enter the parameters below and then click the "OK" button. The terminal starts downloading.
[Protocol]
[Download Address] : Enter the IP address of FTP/TFTP server.
[folder]
[File name]
[User ID]
[Password]
See Download file on page 794 for the default file name of each type.
Note 2:
The LCD displays the messages below:
Note:
While download is in progress
Succeeded in downloading
Failed in downloading
→
[Download Menu]
: Select the protocol of the file server storing download file.
: Enter the folder name on which download file is stored.
: Enter target download file name.
: Enter User ID.
: Enter password.
STATE
Downloading...
Download Complete!
Press Exit to Reset.
Download Failed!
CHAPTER 4
→
[Download Files] → [Language Pack]
Note 2
LCD
VOL.3-800
CONFIGURATION SETUP
.
Note 1