NEC Univerge sv8500 Manual page 3052

4.2.7 Extra Function
On the Extra Function parameter, set additional functions such as Retransmit Interval, Keeping Call, and Lan-
guage Pattern.
4.2.7.1 Retransmit Interval
On the Retransmit Interval parameter, set retransmit interval of REGISTER and SUBSCRIBE message
during the registration process.
This parameter is available for DtermIP (SIP) with Firmware Version 4.1.x.x or later.
Note:
STEP 1: Select "7. Extra Function" by pressing "7" key on the SIP Settings Menu.
STEP 2: Extra Function Menu appears. Select "1. Retransmit Interval" by pressing "1" key on the Extra
Function Menu.
"1. Retransmit Interval", "2. Keeping Call" and "4. Language Pattern" are available for DtermIP (SIP)
Note:
with Firmware Version 4.1.x.x or later.
"3. Howler Tone" is not supported by DtermIP(SIP) with Firmware Version 4.1.x.x. The setting should be
Note:
"1. Disable" (fixed).
STEP 3: Retransmit Interval Menu appears.
Select "1. Standard" by pressing "1" key to apply the standard interval.
Select "2. 6 seconds" by pressing "2" key to apply 6 second - Interval.
"1. Standard" is applied at default setting.
SIP Settings Menu
21.User
2.Server Address & URI
3.Access Mode
4.SIP Server Port
5.Area ID
6.Encryption
7.Extra Function
Up Down
Exit
Extra Function Menu
271.Retransmit Interval
2.Keeping Call
3.Howler Tone
4.Language Pattern
Exit
Up Down
VOL.3-565
CHAPTER 4 CONFIGURATION SETUP