NEC Univerge sv8500 Manual page 2920

• Password Change
To change an existing password, follow the procedure below. The Password stored in System memory can be
changed from the DtermIP/IP Enabled Dterm only.
START
STEP 1:
Lift the handset and dial "IP Enabled Dterm Password Entry" access code.
Lift the handset and dial "IP Enabled Dterm Password Entry" access code; receive SPDT.
The LCD indicaters "OLD PASSWORD" prompt.
STEP 2:
Enter the current password.
Enter your old password; receive SPDT.
STEP 3:
Enter new password.
"NEW PASSWORD" prompt appears. Enter your new password; receive DT.
STEP 4:
Repeat the new password.
"REPEAT" prompt appears. Enter your new password again to confirm your entry; receive
SST.
"SET" indication appears when your new password has been set.
STEP 5: Replace the handset.
Replace the handset.
END
CHAPTER 4
OLD PASSWORD
10:31 AM FRI 30 MAR 2001
MIC DND >>>
******
10:31 AM FRI 30 MAR 2001
MIC DND >>>
NEW PASSWORD
10:31 AM FRI 30 MAR 2001
MIC DND >>>
******
10:31 AM FRI 30 MAR 2001
MIC DND >>>
"REPEAT" prompt
REPEAT
10:31 AM FRI 30 MAR 2001
MIC DND >>>
SET
10:31 AM FRI 30 MAR 2001
MIC DND >>>
10:31 AM FRI 30 MAR 2001
MIC DND >>>
VOL.3-433
CONFIGURATION SETUP
SPDT
SPDT
DT
SST