NEC Univerge sv8500 Manual page 3281

6.2.25.2 Before Downloading
Before downloading the font data file, prepare the following:
• DT700 Series
• Device with FTP/TFTP server function (PC)
• HUB and LAN cable for connecting DT700 Series and FTP/TFTP server to network
• Download file
Language Pack file
For firmware versions earlier than 4.0.0.0 (except for DT730G), displayed as "Translation data file."
Note 1:
For firmware versions earlier than 4.0.0.0 (except for DT730G), displayed as "trnslate.tgz."
Note 2:
After downloading, the parameters assigned on each configuration menu may return to factory default. Be
Note:
sure to write down the assigned value before starting downloading procedure.
Caution: Observe the following while program downloading:
• Do Not Turn OFF the power of the DT700 Series, the Telephony Server, DHCP server.
• Do Not Unplug or Plug the LAN cable connecting to the DT700 Series, the Telephony Server,
DHCP.
• Do Not Turn OFF the power of the HUB connecting to the DT700 Series, Telephony Server,
DHCP.
TYPE
Note 1
VOL.3-794
CHAPTER 4
DEFAULT FILE NAME
LangPack.tgz
Note 2
CONFIGURATION SETUP