NEC Univerge sv8500 Manual page 2357

[1] Click the Shutdown button under SYSTEM CONTROL area.
<< Telephony Server Maintenance Menu >>
[System Status]
Memory: XX.X% used
XXXXMB Total / XXXMB Free
CPU: XX%
Load Average: XXX/XXX/XXX
LAN1 IP: XXX.XXX.XXX.XXX
-- Mask: XXX.XXX.XXX.XXX
-- Speed: XXXXXX/XXX
LAN2 IP: XXX.XXX.XXX.XXX
-- Mask: XXX.XXX.XXX.XXX
Image Capacity: XX.X% used
XXXXMB Total / XXXMB Free
CF Capacity: XX.X% used
XXXXMB Total / XXXXMB Free
STEP 3: Power off the SR-MGC(E).
Make sure that PWR lamp goes out, and then turn off the power switch on the rear of the SR-
MGC(E).
The following explains how to shut down the SR-MGC(E) when neither PCPro nor Telephony Server Mainte-
nance Menu can be connected to the SR-MGC(E).
STEP 1: Power off the SR-MGC(E)
[1] Press the PWR switch on the front panel of the SR-MGC(E).The SR-MGC(E) automatically
shuts down.
[2] Make sure that the PWR lamp goes out after the shutdown, and then turn off the power switch
on the rear of SR-MGC(E).
Upload
Program
Office Data
License
Patch
Log files
Language Data
Office Data Upload
VOL.2-2104
SYSTEM CONTROL
Download Delete
SR-MGC(E)
Shutdown
Reboot
Switch image
Read Version
Advanced Menu