2.15
Virtual Display
SWT 3000 virtual display is an APP running on any Android mobile phone. You can easily read out device
status, command counter, and alarm / errors from the attached SWT 3000 via USB OTG (On-The-Go) cable
connection. There is no need to take a laptop for the regular maintenance check.
[sc_virtual_display_usb_connection, 1, --_--]
The major features supported in SWT vDisp:
•
Display command counter (input / output) for up to 16 commands
•
Display event log, alarm / error and device information
•
Reset trip counter
•
Login before connection if the user authentication is enabled
•
Easy to use, runs on all standard Android mobile phones (Android 4.1 or higher)
•
APP opens automatically when SWT 3000 is connected
•
Ready to use without firmware update (compatible with all firmware release P3.5.xxx)
SWT vDisp is only supported for stand-alone SWT 3000. It cannot be used for iSWT or external SWT 3000
connected to PowerLink.
Smart Communication, SWT 3000 Teleprotection, Equipment Manual
C53000-G6040-C605-1, Edition 03.2020
Functional Description
2.15 Virtual Display
93