Lim/Lims Board For Lan Connection - Siemens HiPath 3000 Series Service Documentation

Nur für den internen Gebrauch
13.5

LIM/LIMS board for LAN connection

The boards LIM and LIMS allow the cost-effective connection of HiPath 3000 in TCP/IP-based
LANs for the central system administration, APS transfer, TeleData Office or HiPath Fault Man-
agement.
The LAN Interface Module LIM is an optional plug-in card for all central control boards of HiPath
3000 with the exception of the
from S30810-Q2935-A401 or later, and the
Q2935-Z401 or later. The board provides an Ethernet (10BaseT/10 megabit) LAN connector
via an 8-pin RJ45 jack.
The LAN Interface Module for SAPP LIMS is an optional plug-in card for the
control board in HiPath 3800. The board provides two Ethernet (10BaseT) LAN connectors via
two 8-pin RJ45 jacks:
Up to 6 TAPI 120 V2.0 can be operated via the LIM module on HiPath 3000 V4.0 SMR6 or later.
However, a maximum traffic value of 400 BHCA is permitted.
Power dialers are not released for use.
A31003-H3590-S100-7-7620, 06/2012
HiPath 3000/5000 V9, Service documentation
CBSAP (HiPath 3800), the
CBRC
HiPath 3000/5000 in the LAN Network
LIM/LIMS board for LAN connection
CBCC (HiPath 3550, HiPath 3350)
(HiPath 3500, HiPath 3300) from S30810-
h3h5_in_the_lan.fm
CBSAP central
13-7