Additional Settings; Set Time And Date; Time Switches: Operation Selector Position - Siemens Synco ZW775 V2.0 Commissioning Instructions

Siemens Building Technologies
HVAC Products

5.4 Additional settings

5.4.1 Set time and date

•
Select Applications > Popcard...
• Double-click data point "Time of day/date" to open the dialog box, set the current
date and the time of day and click

5.4.2 Time switches: Operation selector position

• Select
Applications > Popcard...
• Double-click the corresponding data point "Time switch 1...4" to open the dialog box,
select operation selector position "Auto"/ "Off"/"On" and click
values.
Commissioning instructions OZW775 V2.01
Further commissioning steps
and then operating page "Commissioning".
to enter the values.
OK
and then operating page "Operation selector".
to enter the
OK
95/148
CE1C5663en
22.06.2012