Connection To Smash Using Ws-Man - Hitachi Compute Blade 2000 User Manual

Connection to SMASH using WS-MAN

Windows Remote Management (WinRM), in which WS-MAN protocol has been
implemented, is used for connection to SMASH. The following figure shows an
example of connection to SMASH using WinRM.
Use WinRM 2.0 or later. Behavior with WnRM 1.1 is

not supported. You can download Windows
management framework including WinRM 2.0 from
Microsoft Web site.
When using WinRM, make sure that WS-MAN service

is enabled. See Chapter 5: Server Blade Setup >
Server Settings Tab > Service Settings for details
about WS-MAN service.
When using WinRM, make sure that SMASH-CLP is

included in the user account roles. See Chapter 5:
Server Blade Setup > Initial Settings with Server Blade
Web Console > User Account Configuration for details
about WinRM.
1795