Show Command-Tree - Dell Z9500 Reference Manual

show command-tree

Display the entire CLI command tree, and optionally, display the utilization count for each command and
its options.
Z9500
Syntax
show command-tree [count | no]
Parameters
count
no
Defaults none
Command
•
Modes
•
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
8.3.19.0
8.3.12.0
8.3.11.1
8.2.1.0
Usage Reload the system to reset the command-tree counters.
Information
Example
Dell#show command-tree count
!
Enable privilege mode:
enable command usage:3
exit
show
count option usage: 3
show version command usage:1
!
Global configuration mode:
130
Display the command tree with a usage counter for each
command.
Display all of the commands that may be preceded by the
keyword no, which is the keyword used to remove a
command from the running-configuration.
EXEC
EXEC Privilege
Description
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the S4810.
Introduced on the Z9000.
Introduced.
<0-15> option usage: 0
command usage:1
command-tree command usage:9
Control and Monitoring