Show Log Permanent - Allied Telesis CentreCOM FS980M/9 Command Reference Manual

L C
OGGING OMMANDS

SHOW LOG PERMANENT

show log permanent
Overview This command displays the contents of the permanent log.
show log permanent [tail [<10-250>]]
Syntax
show log permanent [<stack-ID>] [tail [<10-250>]]
Default If the optional tail parameter is specified only the latest 10 messages in the
permanent log are displayed. A numerical value can be specified after the tail
parameter to select how many of the latest messages should be displayed.
Mode User Exec, Privileged Exec and Global Configuration
Example To display the permanent log, use the command:
awplus#
Example To display the permanent log of stack member 2, use the command:
awplus#
Output Figure 7-4:
awplus#show log permanent

<date> <time> <facility>.<severity> <program[<pid>]>: <message>
-------------------------------------------------------------------------
2016 Feb 16 02:20:40 kern.err s_src@awplus kernel: Last message 'RTNL: assertion
fail' repeated 11 times, suppressed by syslog-ng on awplus
2016 Feb 16 02:52:38 local6.crit awplus Pluggable[428]: Pluggable AT-SP10SR inserted
into port1.0.5
2016 Feb 16 02:52:38 local6.crit awplus Pluggable[428]: Pluggable AT-SP10SR inserted
into port1.0.6
2016 Feb 16 02:52:38 local6.crit awplus Pluggable[428]: Pluggable AT-SP10SR inserted
into port1.0.7
2016 Feb 16 02:52:39 local6.crit awplus Pluggable[428]: Pluggable AT-SP10SR inserted
into port1.0.8
2016 Feb 16 02:52:39 local6.crit awplus Pluggable[428]: Pluggable AT-SP10SR inserted
into port1.0.9
Related clear log permanent
Commands
default log permanent
log permanent
613-50157-01 Rev C
Parameter Description
<stack-ID>
Stack member number, from 1 to 8.
tail
Display only the latest log entries.
<10-250>
Specify the number of log entries to display.
show log permanent
show log permanent 2
Example output from the show log permanent command
Command Reference for FS980M Series
AlliedWare Plus™ Operating System - Version 5.4.7-0.x
312