L
C
OGGING
OMMANDS
SHOW LOG PERMANENT
show log permanent
Overview
This command displays the contents of the permanent log.
show log permanent [<stack-ID>] [tail [<10-250>]]
Syntax
Default
If the optional tail parameter is specified only the latest 10 messages in the
permanent log are displayed. A numerical value can be specified after the tail
parameter to select how many of the latest messages should be displayed.
Mode
User Exec, Privileged Exec and Global Configuration
Example
To display the permanent log of stack member 2, use the command:
awplus#
Output
Figure 8-5:
awplus#show log permanent 2
Stack member 2:
<date> <time> <facility>.<severity> <program[<pid>]>: <message>
-------------------------------------------------------------------------
2014 Feb 25 09:10:48 daemon.crit awplus-2 HPI: HOTSWAP Pluggable 2.0.51 hotswapped
in: AT-StackXS/1.0
2014 Feb 25 09:10:48 daemon.crit awplus-2 HPI: HOTSWAP Pluggable 2.0.52 hotswapped
in: 2127931-2
2014 Feb 25 09:10:50 user.crit awplus-2 VCS[922]: Member 1 (eccd.6d7d.a50e) has
joined the stack
2014 Feb 25 09:10:52 user.crit awplus-2 VCS[922]: Member 1 (eccd.6d7d.a50e) has
become the Active Master
2014 Feb 25 09:10:52 local6.alert awplus-2 VCS[922]: stack member has booted from
non-default location, SW version auto synchronization cannot be supported.
2014 Feb 25 09:10:52 user.crit awplus-2 VCS[922]: Stack Virtual MAC is
0000.cd37.0002
2014 Feb 25 09:11:46 user.crit awplus-2 ATMF[862]: awplus-x510 has joined. 1
member in total.
Related
clear log permanent
Commands
default log permanent
log permanent
C613-50103-01 REV A
Parameter
Description
<stack-ID>
Stack member number, from 1 to 8.
tail
Display only the latest log entries.
<10-250>
Specify the number of log entries to display.
show log permanent 2
Example output from the show log permanent command
Command Reference for x310 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
376