Show Log Permanent - Allied Telesis AT-x510-28GTX Command Reference Manual

L C
OGGING OMMANDS

SHOW LOG PERMANENT

show log permanent
Overview This command displays the contents of the permanent log.
show log permanent [<stack-ID>] [tail [<10-250>]]
Syntax
Default If the optional tail parameter is specified only the latest 10 messages in the
permanent log are displayed. A numerical value can be specified after the tail
parameter to select how many of the latest messages should be displayed.
Mode User Exec, Privileged Exec and Global Configuration
Example To display the permanent log of stack member 2, use the command:
awplus#
Output Figure 9-5:
awplus#show log permanent 2

Stack member 2:

<date> <time> <facility>.<severity> <program[<pid>]>: <message>
-------------------------------------------------------------------------
2014 Feb 25 09:10:48 daemon.crit awplus-2 HPI: HOTSWAP Pluggable 2.0.51 hotswapped 
in: AT-StackXS/1.0 
2014 Feb 25 09:10:48 daemon.crit awplus-2 HPI: HOTSWAP Pluggable 2.0.52 hotswapped 
in: 2127931-2 
2014 Feb 25 09:10:50 user.crit awplus-2 VCS[922]: Member 1 (eccd.6d7d.a50e) has 
joined the stack 
2014 Feb 25 09:10:52 user.crit awplus-2 VCS[922]: Member 1 (eccd.6d7d.a50e) has 
become the Active Master 
2014 Feb 25 09:10:52 local6.alert awplus-2 VCS[922]: stack member has booted from 
non-default location, SW version auto synchronization cannot be supported. 
2014 Feb 25 09:10:52 user.crit awplus-2 VCS[922]: Stack Virtual MAC is 
0000.cd37.0002 
2014 Feb 25 09:11:46 user.crit awplus-2 ATMF[862]: awplus-x510 has joined. 1 
member in total.
Related clear log permanent
Commands
default log permanent
log permanent
C613-50102-01 REV C
Parameter Description
<stack-ID>
Stack member number, from 1 to 8.
tail
Display only the latest log entries.
<10-250>
Specify the number of log entries to display.
show log permanent 2
Example output from the show log permanent command
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
382