Boot System Backup - Allied Telesis CentreCOM FS980M/9 Command Reference Manual

F C M
ILE AND ONFIGURATION ANAGEMENT

BOOT SYSTEM BACKUP

boot system backup
Overview Use this command to set a backup release file to load if the main release file cannot
be loaded.
Use the no variant of this command to stop specifying a backup release file.
Syntax boot system backup <filepath-filename>
no boot system backup
Mode Global Configuration
Examples To specify the file FS980-5.4.6-2.4.rel as the backup to the main release file, use the
commands:
awplus#
awplus(config)#
To stop specifying a backup to the main release file, use the commands:
awplus#
awplus(config)#
Related boot config-file
Commands
boot config-file backup
boot system
show boot
613-50157-01 Rev C
C
OMMANDS
Parameter
<filepath-filename>
backup
configure terminal
boot system backup flash:/FS980-5.4.6-2.4.rel
configure terminal
no boot system backup
Command Reference for FS980M Series
AlliedWare Plus™ Operating System - Version 5.4.7-0.x
Description
Filepath and name of a backup release file.
Backup release files must be in the Flash filesystem.
Valid release files must have a . rel extension.
The specified file is a backup release file.
82