Table of Contents
Advertisement
F
C
M
ILE AND
ONFIGURATION
ANAGEMENT
BOOT SYSTEM BACKUP
boot system backup
Overview
Use this command to set a backup release file to load if the main release file cannot
be loaded.
Use the no variant of this command to remove the backup release file as the
backup boot file.
Syntax
boot system backup <filepath-filename>
no boot system backup
Mode
Global Configuration
Examples
To specify the file x310-5.4.6-0.1.rel as the backup to the main release file, use the
commands:
awplus#
awplus(config)#
To remove the file x310-5.4.6-0.1.rel as the backup to the main release file, use the
commands:
awplus#
awplus(config)#
Related
boot config-file
Commands
boot config-file backup
boot system
show boot
C613-50103-01 REV A
C
OMMANDS
Parameter
<filepath-filename>
backup
configure terminal
boot system backup flash:/x310-5.4.6-0.1.rel
configure terminal
no boot system backup flash:/x310-5.4.6-0.1.rel
Command Reference for x310 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
Description
Filepath and name of a backup release file.
Backup release files must be in the Flash filesystem.
Valid release files must have a . rel extension.
The specified file is a backup release file.
109
Advertisement
Table of Contents
