Boot System Backup - Allied Telesis IE340 Series Command Reference Manual

F C M
ILE AND ONFIGURATION ANAGEMENT

BOOT SYSTEM BACKUP

boot system backup
Overview Use this command to set a backup release file to load if the main release file cannot
be loaded.
Use the no variant of this command to stop specifying a backup release file.
Syntax boot system backup <filepath-filename>
no boot system backup
Mode Global Configuration
Examples To specify the file IE340-5.5.2-2.1.rel as the backup to the main release file, use the
commands:
awplus#
awplus(config)#
To stop specifying a backup to the main release file, use the commands:
awplus#
awplus(config)#
Related boot config-file
commands
boot config-file backup
boot system
show boot
C613-50631-01 Rev A
C
OMMANDS
Parameter
<filepath-filename>
backup
configure terminal
boot system backup flash:/IE340-5.5.2-2.1.rel
configure terminal
no boot system backup
Command Reference for IE340 Series
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
Description
Filepath and name of a backup release file.
Backup release files must be in the Flash filesystem.
Valid release files must have a . rel extension.
The specified file is a backup release file.
147