Security-Password Warning - Allied Telesis CentreCOM FS980M/9 Command Reference Manual

U A C
SER CCESS OMMANDS
-
SECURITY PASSWORD WARNING

security-password warning

Overview This command specifies the number of days before the password expires that the
user will receive a warning message specifying the remaining lifetime of the
password.
Note that the warning period cannot be set unless the lifetime feature is enabled
with the
The no variant of the command disables this feature.
security-password warning <0-1000>
Syntax
no security-password warning
The default warning period is 0, which disables warning functionality.
Default
Mode Global Configuration
Example To configure a warning period of three days, use the command:
awplus#
awplus(config)#
Related security-password forced-change
Commands
security-password history
security-password lifetime
security-password minimum-categories
security-password minimum-length
security-password reject-expired-pwd
show running-config
show security-password configuration
613-50157-01 Rev C
security-password lifetime
Parameter Description
<0-1000>
Warning period in the range from 0 to 1000 days. A value 0 disables
the warning functionality and no warning message is displayed for
expiring passwords. This is equivalent to the no security-password
warning command. The warning period must be less than, or equal
to, the password lifetime set with the
command.
configure terminal
security-password warning 3
security-password
Command Reference for FS980M Series
AlliedWare Plus™ Operating System - Version 5.4.7-0.x
command.
security-password lifetime
148